Iron Remover Parallel with RX107 Aeration valve

Category:
Ask about product

The unit treats water by removing iron and manganese using a specialised catalytic bed in two parallel-connected cylinders. It is equipped with an aeration unit (compressor, aeration tank, and valve) to ensure optimal oxidation of iron and manganese. The individually programmed iron remover measures the volume of water and regenerates the filter medium by flushing out iron and manganese deposits. After the regeneration process, the unit is ready for operation. Suitable for use with membrane hydrophores, where chemical reagents cannot be used for regeneration.

The device allows water treatment by removing iron and manganese using a specialized filtration bed.The individually programmed iron remover measures the volume of treated water and regenerates the filtration bed by washing out the iron and manganese deposits. After the regeneration process, the device is again ready for operation.

Before starting the installation, please read this manual and comply with all safety rules regarding the start-up and operation of the device. Compliance with the instructions contained herein will ensure safe and full use of the purchased device. Failure to follow the instructions may cause damage in health and material. All installation work must be carried out in accordance with the requirements of applicable law in Poland.

Properties:

  • control valve with ceramic discs giving high
    mechanical endurance and quiet operation,
  • automatic regeneration,
  • simple construction,
  • output and input signal connectors
  • no additional chemicals needed for
    regeneration,
  • hygienic certificate
VALVE MODEL

RX75A3 – RX107
Application

drinking water
Working temperature

5 ˚C – 50 ˚ C
Working pressure

>6
Power supply

110 – 230 V,
50-60 Hz

Recommended by FITaqua

  • Iron Remover with RX107 Aeration valve

    The unit treats water by removing iron and manganese using a specialised catalytic bed. It is equipped with an aeration unit (compressor, aeration tank, and valve) to ensure optimal oxidation of iron and manganese. The individually programmed iron remover measures the volume of water and regenerates the filter medium by flushing out iron and manganese deposits. After the regeneration process, the unit is ready for operation. Suitable for use with membrane hydrophores, where chemical reagents cannot be used for regeneration.

    Read more

  • Iron Remover

    The unit treats water by removing iron and manganese using a specialised catalytic bed. The individually programmed iron remover counts down the time since the last regeneration and restores the water treatment properties of the filter medium by flushing out iron and manganese deposits. After the regeneration process, the unit is ready for operation. Suitable for use with air membrane hydrophore (galvanised).

    Read more

  • Iron Remover with KMnO₄

    The unit treats water by removing iron and manganese using a specialised catalytic bed. The individually programmed iron removal unit measures the volume of water and regenerates the filter medium by flushing out iron and manganese deposits and restoring the bed with a chemical reagent (potassium permanganate, KMnO4). After the regeneration process, the unit is ready for operation.

    Read more

  • Water softener DIUNA XXL (35 l)

    Softener dedicated for use in single-family homes. Modern design for demanding users. Easy access to the display thanks to placing it on top of the softener.

    Softener available with two resin volume variants.

    Read more